Please read and accept the following before using these tools:
Warning Notice
Unsafe Situations
Easy Gas Engineer — Build 2026-08-12
Engineer & customer details▾
Engineer details
Customer / responsible person
Defects identified0▾
For each defect identified at this property, add a numbered row below. Tick the defect type(s), choose a classification, and describe the fault and remedial action required. You can attach photos to each defect — they will appear as an appendix at the end of the report.
Permission to act▾
Acknowledgement & sign-off▾
Acknowledgement: I acknowledge receipt of this warning notice and understand that I must not use, or permit the use of, any unsafe appliance until the defects have been rectified. To do so would put me in breach of the Gas Safety (Installation and Use) Regulations 1998.
Issued by (engineer)
Sign above
Received by (responsible person)
Sign above
Disclaimer: This tool is provided as an aid to help competent persons record an unsafe gas situation and issue a Warning Notice. It does not replace professional engineering judgement or the procedures set out in IGEM/G/11 (GIUSP). Users must be Gas Safe registered and competent for the categories of work being undertaken. Users are solely responsible for the accuracy of all entries and for following the prescribed procedure for the classification recorded, in accordance with the Gas Safety (Installation and Use) Regulations 1998 (as amended) and all other applicable legislation and standards. To the fullest extent permitted by law, the author accepts no liability for any error, omission, or any direct or indirect loss or damage arising from use of this tool or reliance on its output.